Guides
Boundary Mode in ColorDood: Stay Inside the Lines Like a Pro
Inside clips brush strokes to the shape where your touch starts; Free paints anywhere. This power-user guide shows when to use each, how to combine them on one page, and how to avoid the common mistakes.
Updated November 20, 2026 · 9 min read · 1,170 words
**ColorDood gives you two boundary modes for the Brush: Inside and Free.** Inside is the default and keeps your brush strokes within the enclosed shape where your touch begins. Free lets you paint anywhere on the page. The skill is not picking one forever; it is knowing which to use for each part of a page, and switching without thinking about it.
ColorDood is a free coloring app for iOS and Android with 1000+ scholar-guided pages, 11 tools, and 10 palettes. This guide is the power-user companion to the basic boundary mode guide. It assumes you already know where the toggle is, and focuses on control, combination, and recovery.
How Inside decides the region
Inside works from the point where your touch starts. The app looks at the enclosed area under that first touch and limits the stroke to it. The rule is simple: start the stroke in the shape you want to color. If you start on the white background and drag into a leaf, the stroke is limited to the background area where you began, which looks like nothing happened.
This matters most on pages with small, connected shapes. A stroke that starts in the wrong place can look like it ignored the outline. Lift your finger, check where you began, and try again from the correct spot. With practice this becomes automatic.
What Free mode is really for
Free mode paints anywhere. The Brush does not stop at outlines, so you can add background texture, cross a border on purpose, or soften a shape with loose strokes. Some people prefer this for a relaxed, sketchy look. It is also the only way to paint a sky that runs behind a building, or to add a wash across several shapes at once.
Free mode asks for a bit more care. A quick swipe can color a neighboring shape. If that is not what you want, use Undo. The undo button in the canvas header covers up to 12 steps, so a short run of mistakes is easy to reverse.
Fill is the third option people forget
Fill works the same way in both modes. A tap on an enclosed region fills the whole region. You do not need to switch to Inside to use Fill inside a shape, and switching to Free does not change how Fill behaves. A common routine is to use Fill for big areas, then use the Brush in Inside mode for shading near edges, then switch to Free for a loose background wash.
A decision table for each part of a page
| Part of the page | Mode | Why |
|---|---|---|
| Large solid shapes | Fill first | One tap covers the area; faster than brushing |
| Edges and small details | Inside + small brush | Strokes stop at the line |
| Background wash | Free | Color crosses the shapes on purpose |
| Texture and shading | Free at low opacity feel | Loose strokes look natural |
| Tiny gaps under 2mm | Fill or zoom + Inside | Avoids spill into neighbors |
Combining both modes on one page
You do not have to choose one mode for the whole page. A practical approach is to use Fill for the main shapes, switch to Inside for careful edges and details, and then switch to Free for a background wash or texture. Work in that order and the page stays clean while still feeling loose in the open areas.
If you are coloring a page with very small details, such as a tiling pattern with many tight shapes, take it slowly. Use a smaller brush size, keep the strokes short, and check often. Inside mode is especially helpful here, because it keeps your color from spilling into the next tiny cell.
Pairing boundary mode with zoom
Zoom and boundary mode multiply. At 1x with a wide brush, Inside keeps a big petal tidy. At 4x with a small brush, Inside keeps a tiny leaf tidy. Free mode at high zoom is where most spills happen, because your finger covers more of the screen relative to the shape. The power-user rule: zoom in first, then decide the mode.
- Zoom to the area you want, usually 2x to 3x
- Check the boundary toggle in the tool dock
- Use Inside for the shape you are in
- Drop the brush size until the stroke fits the gap
- Paint one short stroke and look at it
- Switch to Free only when you want to cross a line on purpose
Common mistakes and how to fix them
- **Starting a stroke in the wrong shape (Inside):** lift your finger, start inside the shape, try again
- **Painting over a neighbor by accident (Free):** slow down near the outline, use a smaller brush, use Undo
- **Forgetting the setting persists:** check the toggle at the start of each session, especially on a shared phone
- **Using Free for a whole detailed page:** switch to Inside for edges, Free only for open areas
A five-minute trial routine
Pick a simple page with clear, separate shapes. Start in Inside mode. Choose one color and paint a few strokes that begin inside a shape and drag past its edge. Watch where the color stops. Then undo those strokes. Switch to Free mode and paint the same kind of stroke across the same edge. Compare. Undo again. Finally, use Fill on two shapes to confirm that Fill behaves the same way in both modes.
Power-user habits that stick
- Check the toggle before every session; it persists between sessions
- Name your mode choice out loud when teaching a child: 'Inside for the petals, Free for the sky'
- Keep the brush size slider visible so you adjust it with the mode
- Use Undo early rather than repainting a large area
- Save a second copy to the gallery before experimenting with Free on a finished page
What this guide does not cover
This guide does not explain every brush option. For tool details, see the brush tools guide. It also does not cover zoom and fine detail in depth, which is a separate guide in this cluster. Coloring is a pastime, and it is not medical advice or a substitute for professional support of any kind.
Free line art
Pages you can print from this guide
Every thumbnail is a real page from the ColorDood library. Open one to download the PNG or print a PDF — no signup.
Frequently asked questions
What is the default boundary mode in ColorDood?
Inside is the default. Brush strokes are clipped to the enclosed shape where your touch begins. Free paints anywhere on the canvas.
Does Fill follow the Inside or Free setting?
No. Fill always fills the full enclosed region on tap, in either mode. The boundary setting only changes how Brush strokes behave.
Where do I change the boundary mode?
The toggle is in the tool dock on the canvas. The setting persists, so it stays the way you left it until you change it again.
Is Free mode harder for beginners?
It can be easier for some people because there is no edge to hit, and harder for others because strokes spill. Try both on a simple page for five minutes and decide.
Can I switch modes in the middle of a page?
Yes. Switching is instant and does not affect strokes you already painted. Many power users switch several times on one page.
Ready to play a free coloring game?
Download ColorDood — free AI adult coloring book and coloring game with 250+ free pages (4,500+ with Premium), 50+ color palettes, PDF & HD exports (Premium), and no login required.
